| Feature |
Specification |
| FPGA |
Xilinx Virtex-4
FX100, FX140
FFG1517 footprint
|
| PCI
Bus |
64-bit 66MHz PCI or 64-bit 133MHz PCI-X
interface in separate bridge device. Quad
DMA controllers, FIFO and interrupt controller
with a peak data rate of 1066 MByte/sec
|
| Memory |
SDRAM
1024MB in 4 independent banks of DDR-II
DRAM - 4 banks of 256MB each
Flash
16MBytes
|
| Front
I/O |
Up to 146 I/O via a range of XRM front
panel adapters
Maximum I/O data rate >40Gb/sec
4 x Rocket IO
XRM-IO146 (standard)
Programmable switching levels of 2.5V or
3.3V
Custom XRM modules
|
| Rear I/O |
XMC capability supporting PCI
Express or RapidIO via P15 and P16 connectors
64 I/O connections via PMC Pn4 connector –
programmable switching levels of 2.5V or 3.3V
|
| Clocks |
Local bus clock
programmable up to 100MHz for transfers between
PCI bridge and User FPGA.
High performance user clock programmable up
to 500MHz using LVPECL with very low jitter.
Additional 200MHz reference clock for IOB
delay circuits.
|
| Configuration |
PCI Bus direct to SelectMAP
port
From Flash direct on power up
External JTAG connector |
| SelectMap |
Download and read-back
performance up to 256MB/s peak.
|
| Encrypting |
Dual battery back-up for encryption
keys via XRM
|
| Software
|
Drivers for WinNT, 2000, XP,
Linux and VxWorks
API with template designs in VHDL and Verilog |
| Environmental
|
Temperature
Operating Temperature 0 to +50 degrees C
Non-Operating(Storage) Temperature -40 to +65 degrees C
Operating Humidity 5% to 90% at 40 degrees C non-condensing
Non-Operating(Storage) Humidity 5% to 90% at 40 degrees C non-condensing
EMC
FCC 47CFR Part 2
EN55022 Equipment Class B
|
| Ordering
Information |
ADM-XRC-4FX/xxxx-yy(/IO)(/X)
|
| parameter |
description |
options |
xxxx
yy
IO
X
|
Virtex-4 device
Virtex-4 speed
Front Panel Adapter
XRM J15 & J16
|
FX100 or FX140
10, 11, 12
XRM-IO146 (std),
XRM-IO34, XRM-ADC,
XRM-DAC, XRM-DDR,
XRM-FPDP, XRM-MDR26,
XRM-ZBT, XRM-RIO,
XRM-ETH, XRM-CAMERALINK
, XRM-OPT, XRM-HSSDC2
X=fitted Blank=not fitted
|
> Datasheets
