ACP-FX-N2-125 related documents

Datasheet (0.46MB)

User Manual (0.15MB)

ACP-FX-N2/125




Photo 1 of acp-fx-n2-125Photo 2 of acp-fx-n2-125Photo 3 of acp-fx-n2-125Main Photo of acp-fx-n2-125 Board

Features

  • Board Format : cPCI
  • Host I/F : PCI/PCI-X®
  • Target Device(s) : Xilinx Virtex-4 {FX100, FX140} (FF1148)
  • SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (4x 64M x 32-bits)
  • FLASH : 32MByte parallel Flash (connected to PCI Bridge FPGA)
  • FLASH : 4MByte serial Flash (connected to user FPGA)
  • Provides 9 channels of 14-bit Analog to Digital convertors (14-bits).
  • Drivers for Microsoft Windows™, Linux and VxWorks
  • The ADM-XRC Gen 2 SDK provides the example C and HDL source code, giving software engineers and FPGA designers a head start in creating applications.

Applications

  • Data Logger

Summary

The ACP-FX-N2/125 is a high performance data capture and processing board using Xilinx Virtex-4 Platform FPGAs.

The ACP-FX-N2/125 is based on the Alpha Data ADM-XRC-4FX FPGA board which is a complete FPGA processing system, memory, I/O and Host interface resources. The ACP-FX-N2/125 board operates in one of two modes depending on the position of the board in the rack. One is master mode in which other ACP-FX-N2/125 cards synchronise to it or as a slave where it synchronises to another ACP-FX-N2/125. It provides 9 ADC channels for capturing external data using either an internal or externally generated clock.



Xilinx Virtex-4 Family logoPCI-X logo

ACP-FX-N2-125 Detailed Specification

Product

ACP-FX-N2/125

Board Format

cPCI

Type

FPGA Board

Host Interface

PCI/PCI-X®

Functional Summary

The ACP-FX-N2/125 is a high performance data capture and processing board using Xilinx Virtex-4 Platform FPGAs.

Functional Description

The ACP-FX-N2/125 is based on the Alpha Data ADM-XRC-4FX FPGA board which is a complete FPGA processing system, memory, I/O and Host interface resources. The ACP-FX-N2/125 board operates in one of two modes depending on the position of the board in the rack. One is master mode in which other ACP-FX-N2/125 cards synchronise to it or as a slave where it synchronises to another ACP-FX-N2/125. It provides 9 ADC channels for capturing external data using either an internal or externally generated clock.

Target Device(s)

family : Virtex-4

footprint : FF1148

devices : FX100, FX140

On board memory

SDRAM :

1GByte in 4 independent banks of DDR-II SDRAM (4x 64M x 32-bits)


FLASH :

32MByte parallel Flash (connected to PCI Bridge FPGA)


FLASH :

4MByte serial Flash (connected to user FPGA)


Software

Drivers for Microsoft Windows™, Linux and VxWorks. The ADM-XRC Gen 2 SDK provides the example C and HDL source code, giving software engineers and FPGA designers a head start in creating applications.

Applications

Data Logger

Front Connector I/O

ADC Ports
type:

ADC

Channels:

9

fmax:

125MHz

BandWidth:

-3dB from 30kHz to 125MHz

levels:

full scale ±1V, protected to ±4V

Resolution:

14-bit

Impedance:

50Ω, transformer coupled

Information:

Connector: LEMO

External Clock
type:

Clock

Channels:

1

levels:

full scale, ±1V, protected to ±4V

fmax:

10MHz

Impedance:

50Ω, transformer coupled

comms
Channels:

2

type:

Gigabit Ethernet

Connector:

RJ45 Connectors

Trigger I/O
Channels:

3

Connector:

LEMO Connectors

Timing Bus Port
Channels:

1

Connector:

20way IDC Connector

Rear Connector IO

26 I/O connections via J3

Board Configuration

CLOCKS :

Local bus clock programmable up to 80MHz

Low-jitter user clock, programmable up to 637.5MHz

Additional 200MHz reference clock for IOB delay circuits.


FPGA :

PCI Bus direct to SelectMAP port

From Flash direct on power up

External JTAG connector


Environmental Specification

TEMPERATURE :

Air cooled option (AC0)

Operating Temperature 0° to +55°C

Non-Operating(Storage) Temperature -40° to +85°C

Operating Humidity 5% to 95% at 40°C non-condensing

Non-Operating(Storage) Humidity 5% to 95% at 40°C non-condensing

Air cooled industrial option (AC1)

Operating Temperature -20° to +55°C

Non-Operating(Storage) Temperature -40° to +85°C

Operating Humidity 5% to 95% at 40°C non-condensing

Non-Operating(Storage) Humidity 5% to 95% at 40°C non-condensing


EMC :

FCC 47CFR Part 2

EN55022 Equipment Class B


For more information on the operating conditions for the different cooling options go to:
Alpha Data Environmental Specification Page.

Or read:
the Alpha Data Environment Specification (PDF).

ACP-FX-N2-125 Order Code Information

Product code

ACP-FX-N2/125/z-y(c)

Virtex-4 Device

z

Virtex-4 Speed

y

10, 11, 12

Air cooled (comm/ind)

c

blank = air cooled commercial,

/AC1 = air cooled industrial


Sample Code :

ACP-FX-N2/125/-10


Order Code generation for the ACP-FX-N2/125

Go to Order Code Generation Page which allows the generation of specific order codes. The numbers created on this page are for illustration purposes, please contact Alpha Data for more information.


Sales Questions

For any sales questions regarding the ACP-FX-N2-125, please e-mail us at:

sales@alpha-data.com


Technical Support

For any technical questions regarding Alpha-Data products please e-mail us at:

support@alpha-data.com




Product SDKs and Drivers

The ADM-XRC SDK and Driver Page


Other products in the group




 






©2016 Alpha Data Parallel Systems - All rights reserved