BACK-UP BATTERY Products


ADA-VPX3-6T1

photo of ada-vpx3-6t1

Applications

  • Radar/Sonar Beamforming
  • ELINT
  • Image/Video Processing
  • Data Encryption

Features

  • Board Format : 3U VPX
  • Target Device(s) : V6 {LX240T, LX365T, LX550T, SX315T, SX475T} (FFG1759)
  • digital: Up to 146 LVCMOS/LVDS I/O. Programmable signaling levels of 1.5V, 1.8V or 2.5V
  • serial: 8 High-Speed Serial Links
  • Battery back-up for IP encryption keys

ADM-XRC-6TGE

photo of adm-xrc-6tge

Applications

  • Radar/Sonar Beamforming
  • ELINT
  • Image/Video Processing
  • Data Encryption

Features

  • Board Format : XMC
  • Target Device(s) : V6 {LX240T, LX365T, LX550T, SX315T, SX475T} (FFG1759)
  • digital: Up to 146 LVCMOS/LVDS I/O. Programmable signaling levels of 1.5V, 1.8V or 2.5V
  • serial: 8 High-Speed Serial Links
  • Battery back-up for IP encryption keys

ADPE-XRC-6T

photo of adpe-xrc-6t

Applications

  • Radar/Sonar Beamforming
  • ELINT
  • Image/Video Processing
  • Data Encryption

Features

  • Board Format : PCI Express
  • Target Device(s) : V6 {LX130T, LX195T, LX240T, LX365T, SX315T, SX475T} (FFG1156)
  • digital: High Pin Count (HPC) FMC Standard Connector:.         GPIO 80 pairs.         GTX Links x10
  • Standard VITA 57 FMC IO Module Interface

ADM-XRC-6T1

photo of adm-xrc-6t1

Applications

  • Radar/Sonar Beamforming
  • ELINT
  • Image/Video Processing
  • Data Encryption

Features

  • Board Format : XMC
  • Target Device(s) : V6 {LX240T, LX365T, LX550T, SX315T, SX475T} (FFG1759)
  • digital: Up to 146 LVCMOS/LVDS I/O. Programmable signaling levels of 1.5V, 1.8V or 2.5V
  • serial: 8 High-Speed Serial Links
  • Battery back-up for IP encryption keys

ADM-AMC-5A2

photo of adm-amc-5a2

Applications

  • Broadcast, Medical/Bioinformatics, Telecoms, Military, Aerospace, High Performance Computing

Features

  • Board Format : AMC
  • Target Device(s) : V5 {LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T} (FFG1738)
  • digital: 4X HD-SDI/ASI Outputs
  • digital: 2X HD-SDI/ASI Inputs
  • digital: 2x Gigabit Ethernet Ports
  • digital: RS-232 port
  • DSP: TI 320C6415T DSP chip with 8MBytes of ZBT memory
  • DS2432 EPROM with SHA-1 engine
  • Single battery back-up for FPGA encryption keys

ADC-VXS

photo of adc-vxs

Applications

  • Military, Aerospace, High Performance Computing, Scientific/Instrumentation, Broadcast, Medical/Bioinformatics, Telecoms, Security

Features

  • Board Format : 6U VXS/VME
  • Target Device(s) : V5 {LX110T, LX155T, SX95T, FX70T, FX100T} (FFG1136)
  • serial: 4 - x4 SFP modules or x4 HSSDC2 connectors
  • Provides sites for 2 PMC boards as well as onboard FPGA sites.
  • Dual battery back-up for IP encryption keys onboard

XRM-CAMERALINK

photo of xrm-cameralink

Applications

  • Video Frame Grabber
  • Image Processing
  • Video Communications

Features

  • Base Cameralink Interface
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-CLINK-MINI

photo of xrm-clink-mini

Applications

  • Video Frame Grabber
  • Image Processing
  • Video Communications

Features

  • Full Cameralink interface
  • Dual Base Cameralink interfaces
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-DDR

photo of xrm-ddr

Applications

  • Extended memory storage for developing applications
  • Simple I/O interface

Features

  • 34 discrete digital I/Os
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-FPDP

photo of xrm-fpdp

Features

  • Front Panel Data Protocol Interface
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for a back-up battery. Uses SR60 or equivalent batteries.

XRM-HSSDC2A

photo of xrm-hssdc2a

Applications

  • High Speed Serial Communications

Features

  • Quad High Speed serial links (up to 2.5Gbps)
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-IO146

photo of xrm-io146

Applications

  • General purpose I/O Interface

Features

  • 146 discrete digital I/Os LVDS/LVTTL
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-IO146-ROCKET

photo of xrm-io146-rocket

Applications

  • General purpose Serial and Parallel I/O Interface

Features

  • 7x High Speed Serial I/O
  • 112 discrete digital I/Os LVDS/LVTTL
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-IO34

photo of xrm-io34

Applications

  • General purpose I/O Interface

Features

  • 34 discrete digital I/Os LVDS/LVTTL
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-MDR

photo of xrm-mdr

Applications

  • General purpose I/O Interface

Features

  • 25 discrete I/O Interface
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-RIO

photo of xrm-rio

Applications

  • General purpose Parallel RapidIO Interface

Features

  • Dual Parallel RapidIO interfaces
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-RS422

photo of xrm-rs422

Features

  • Multiple RS422 Interface
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.

XRM-RS485

photo of xrm-rs485

Features

  • Multiple RS485 Interface
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for a back-up battery. Uses SR60 or equivalent batteries.

XRM-ZBT

photo of xrm-zbt

Applications

  • Extended memory storage for developing applications
  • Simple I/O interface

Features

  • Dual RS232 Interfaces
  • The battery is needed for the "AES Bitstream Encryption" capability of the Xilinx® Devices. It is required to maintain the AES encryption key such that the FPGA can be loaded with an encrypted bitstream. For all applications using this function either the FPGA board or the attached XRM must have the battery facility.. The XRM provides holders for two back-up batteries. Uses SR60 or equivalent batteries.