Alpha Data Product : ADM-XRC-5T-DA1

ADM-XRC-5T-DA1 Overview Block Diagram Specification Ordering Info

Product Features

Board Format : PMC
Host I/F : PCI/PCI-X^®
Target Device(s) : Xilinx Virtex-5 {LX110T, LX155T, FX70T, FX100T, SX95T} (FFG1136)
SDRAM : 512MByte in 2 independent banks of DDR-II SDRAM 4M x 32-bits @ 333MHz
SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz
FLASH : 4MByte serial Flash
FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA.
Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier
Drivers for Microsoft Windows™, Linux and VxWorks™
The ADM-XRC Gen 2 SDK provides the example C and HDL source code, giving software engineers and FPGA designers a head start in creating applications.

Applications

Signal Capture/Generation

Product Summary

The ADM-XRC-5T-DA1 is a high performance reconfigurable PMC (PCI Mezzanine Card) based on the Xilinx^® Virtex-5 LXT,SXT and FXT range of Platform FPGAs. It Provides onboard Analog to Digital and Digital to Analog functionality for data sampling/generation.

Features include:

The analog Interface consists of a single channel ADC (8-bit resolution at up to 3Gsps) and a single channel DAC (12 bit resolution at up to 2.3GHz).

High speed PCI-X^® interface, external memory, Analog I/O, high density I/O, programmable clocks, temperature monitoring and flash boot facilities.

A comprehensive cross platform API with support for Microsoft Windows™, Linux and VxWorks™ provides access to the full functionality of these hardware features.

Front I/O

A2D

The ADM-XRC-5T-DA1 provides a single Analog to Digital Input

D2A

The ADM-XRC-5t-da1 provides a single Digital to Analog Output

External Clock

The ADM-XRC-5t-da1 provides a single External Clock Input

JTAG I/F

Provides the user access to configure the Target FPGA and to run Chipscope on the active design

Board Config

Allows host to configure system clocks, reload the target flash and directly program the target FPGA.

FLASH

Configuration Flash providing an initialisation design for automatic loading into the target FPGA.

Config Switches

Allows host to configure I/O voltage levels.

Local Bus

Links bridge and target FPGAs. 32/64bit wide data transfers, programmable clock rate 10MHz-80MHz, includes Demand mode DMA handshaking.

PCI Bridge

Alpha Data proprietary firmware is provided for the bridge. It is automatically loaded into the bridge FPGA at power-up.

Provides PCI bus access to/from the host system. Includes multiple DMA engines for fast data transfer.

DMA Engines

Multiple DMA engines allowing fast data transfers to/from the FPGA. Can perform Demand Mode DMA allowing the target to control data transfers.

Rear I/O

Provides 64 discrete digital I/O and if High Speed serial connector fitted, 8 High Speed Serial Links.

Target FPGA

Application/Target FPGA.

Target Device(s)

family : Virtex-5

footprint : FFG1136

devices : LX110T, LX155T, FX70T, FX100T, SX95T

DDR-II SDRAM

512MByte in 2 independent banks of DDR-II SDRAM 4M x 32-bits @ 333MHz

DDR-II SSRAM

8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz

Product

ADM-XRC-5T-DA1

Board Format

PMC

Type

FPGA Board

Host Interface

PCI/PCI-X^®

Functional Summary

Functional Description

Features include:

The analog Interface consists of a single channel ADC (8-bit resolution at up to 3Gsps) and a single channel DAC (12 bit resolution at up to 2.3GHz).

High speed PCI-X^® interface, external memory, Analog I/O, high density I/O, programmable clocks, temperature monitoring and flash boot facilities.

A comprehensive cross platform API with support for Microsoft Windows™, Linux and VxWorks™ provides access to the full functionality of these hardware features.

Target Device(s)

family : Virtex-5

footprint : FFG1136

devices : LX110T, LX155T, FX70T, FX100T, SX95T

Host Interface

64-bit 66MHz PCI or 64-bit 133MHz PCI-X^® interface in separate bridge device with 32-bit 80MHz local bus

4 DMA controllers

Carriers Compatible with ADM-XRC-5T-DA1

ADC-EMC, ADC-PMC, ADC-VXS

On board memory

SDRAM :

512MByte in 2 independent banks of DDR-II SDRAM 4M x 32-bits @ 333MHz

SSRAM :

8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz

FLASH :

4MByte serial Flash

FLASH :

Configuration Flash providing an initialisation design for automatic loading into the target FPGA.

Software

Drivers for Microsoft Windows™, Linux and VxWorks™

The ADM-XRC Gen 2 SDK provides the example C and HDL source code, giving software engineers and FPGA designers a head start in creating applications.

Specific Functions

Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier

Applications

Signal Capture/Generation

Front Connector I/O

ADC Input

channels:	1	type:	ADC
bandwidth:	30MHz to 1700MHz nominal	levels:	Range1: ±410 mV nominal, Range2: ±300 mV nominal
impedance:	50 Ohms	resolution:	8-bit
fmax:	3GHz

DAC Output

channels:	1	type:	DAC
resolution:	12-bit	bandwidth:	1GHz
fmax:	2.3GHz
Information:	Multi-Nyquist Filtering, Nyquist Zones 1,2,3 selectable

Ext Clock

channels:	1	type:	Clock
levels:	±400mV

Rear Connector IO

24 I-O connections via PMC Pn4 connector

(12 LVDS pairs) programmable signaling levels of 2.5V or 3.3V

8 High-Speed Serial Links via P15 connector

Only if the "extra connector fitted" option is chosen

Board Configuration

Clocks :

Local bus clock programmable up to 80MHz

Low-jitter user clock, programmable up to 637.5MHz

Additional 200MHz reference clock for IOB delay circuits.

FPGA :

PCI Bus direct to SelectMAP port

From Flash direct on power up

External JTAG connector

Environmental Specifications

Temperature Options:

AC0AC1CC1

Air Cooled Commercial (AC0)

Operating Temperature Range: 0°C to +55°C

Non-Operating (Storage) Temperature Range: -40°C to +85°C

Operating Humidity: up to 95% (non-condensing)

Air Cooled Industrial (AC1)

Operating Temperature Range: -40°C to +70°C

Non-Operating (Storage) Temperature Range: -55°C to +100°C

Operating Humidity: up to 95% (non-condensing)

Heatsink: Optional finned low profile Black anodized aluminum

Conduction Cooled Industrial (CC1)

Operating Temperature Range: -40°C to +70°C (85 with high efficiency system cooling - contact Alpha Data for more details)

Non-Operating (Storage) Temperature Range: -55°C to +100°C

Operating Humidity: up to 95% (non-condensing)

Heatsink: Finned low profile Black anodized aluminum

EMC:

FCC 47CFR Part 2

EN55022 Equipment Class B

Further Environmental Information can be found by reading:
The Alpha Data Environmental Specification

Product code	ADM-XRC-5T-DA1/z-y(c)(m)(x)
Virtex-5 device	z	LX110T, LX155T, FX70T, FX100T, SX95T
Virtex-5 speed	y	1, 2, 3
Cooling	c	blank = air cooled commercial, /AC1 = air cooled industrial, /CC1 = conduction cooled industrial
Memory Size Fitted	m	blank =each bank has 256MByte - 512MByte for the card, /1 = each bank has 512MByte - 1GByte for the card
HS Serial Connector Fitted	x	blank = not fitted, /X = Connector fitted
Order Code Rules: When AC1 or CC1 Cooling selected, -3 devices are not available When SX95T device selected, -3 speed grade is not available

Sample Code :

ADM-XRC-5T-DA1/LX110T-1

Order Code generation

Go to Order Code Generation Page which allows the generation of specific order codes. The numbers created on this page are for illustration purposes, please contact Alpha Data for more information.