Compatible Products
Products by Features
 | Product Features
Applications
|
Product Summary The ADM-XRC-5T2 is a high performance reconfigurable PMC/XMC (PCI Mezzanine Card) based on the Xilinx® Virtex-5 LXT, SXT and FXT ranges of Platform FPGAs. Features include high speed PCI-X® interface, external memory, high density I/O, programmable clocks, temperature monitoring, battery backed encryption (by using an appropriate XRM) and flash boot facilities. A comprehensive cross platform API with support for Microsoft Windows™, Linux and VxWorks™ provides access to the full functionality of these hardware features. The optional fitting of the XMC connector provides 8 High-Speed Serial Links out to the carrier card. | |
| Product | ADM-XRC-5T2 | ||
| Board Format | PMC/XMC | ||
| Type | FPGA Board | ||
| Host Interface | PCI/PCI-X® | ||
| Functional Summary | The ADM-XRC-5T2 is a high performance reconfigurable PMC/XMC (PCI Mezzanine Card) based on the Xilinx® Virtex-5 LXT, SXT and FXT ranges of Platform FPGAs. | ||
| Functional Description | Features include high speed PCI-X® interface, external memory, high density I/O, programmable clocks, temperature monitoring, battery backed encryption (by using an appropriate XRM) and flash boot facilities. A comprehensive cross platform API with support for Microsoft Windows™, Linux and VxWorks™ provides access to the full functionality of these hardware features. The optional fitting of the XMC connector provides 8 High-Speed Serial Links out to the carrier card. | ||
| Target Device(s) | family : Virtex-5 footprint : FFG1738 devices : LX220T, LX330T, SX240T, FX100T, FX130T, FX200T | ||
| Host Interface | 64-bit 66MHz PCI or 64-bit 133MHz PCI-X® interface in separate bridge device with 64-bit 80MHz local bus 4 DMA controllers FIFO and interrupt controller. | ||
| XRMs Compatible with ADM-XRC-5T2 | XRM-ADC-D2/125, XRM-ADC-D3/1G5, XRM-ADC-D6/250, XRM-ADC-S4/3G, XRM-CAMERALINK, XRM-CLINK-ADV, XRM-CLINK-GIGE, XRM-DAC-D3/275, XRM-DAC-D4/1G, XRM-DDR, XRM-DVI-D-RX, XRM-FCN, XRM-FCN-C1, XRM-HD-SDI, XRM-HSSDC2A, XRM-IO146, XRM-IO34, XRM-OPT, XRM-ZBT | ||
| Carriers Compatible with ADM-XRC-5T2 | |||
| On board memory | SDRAM : Up to 1GByte in 2 independent banks (2G in 4 banks for LX330T, SX240T and FX200T) of DDR-II SDRAM @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | ||
| Software | Drivers for Microsoft Windows™, Linux and VxWorks™ API with template designs in VHDL and Verilog | ||
| Applications | JPEG2000 Radar/Sonar Beamforming ELINT Fingerprint Recognition Data Encryption | ||
| Front Connector I/O |
| ||
| Rear Connector IO |
| ||
| Board Configuration | Clocks : Local bus clock programmable up to 80MHz Low-jitter user clock, programmable up to 637.5MHz Custom clock inputs available through the XRM interface Additional 200MHz reference clock for IOB delay circuits. FPGA : PCI Bus direct to SelectMAP port From Flash direct on power up External JTAG connector | ||
| Battery | Dual battery back-up for IP encryption keys via XRM | ||
| Cooling Options | Air Cooled Commercial (standard) AC1 - air cooled industrial CC1 - conduction cooled industrial | ||
| Environmental Specification | Temperature : Air cooled option Operating Temperature 0° to +55°C Non-Operating(Storage) Temperature -40° to +85°C Operating Humidity 5% to 95% at 40°C non-condensing Non-Operating(Storage) Humidity 5% to 95% at 40°C non-condensing EMC : FCC 47CFR Part 2 EN55022 Equipment Class B | ||
Further Environmental Information can be found by reading: |
| Product code |
ADM-XRC-5T2/z-y(m)(c)(x) | |
Virtex-5 device | z | LX220T, LX330T, SX240T, FX100T, FX130T, FX200T |
Virtex-5 speed | y | 1, 2, 3 |
Memory Size Fitted | m | blank = 512MBit, /1 = 1GBit, /2 = 2GBit |
Cooling | c | blank = air cooled commercial, /AC1 = air cooled industrial, /CC1 = conduction cooled industrial |
XMC Fitted | x | blank = not fitted, /X = XMC Connector fitted |
Note | not all FPGA speed grades available in all configurations. Contact Alpha Data for full details. | |
Order Code Rules: When AC1 or CC1 Cooling selected, -3 devices are not available When LX220T, SX240T, FX200T or LX330T selected, -3 devices are not available When SX240T, FX200T or LX330T selected and AC1 or CC1 cooling chosen, only -1 devices available When LX220T or FX130T selected, memory cannot be 2GBit | ||
Sample Code :
ADM-XRC-5T2/LX220T-1
Order Code generation
Go to Order Code Generation Page which allows the generation of specific order codes. The numbers created on this page are for illustration purposes, please contact Alpha Data for more information.
Sales Questions
For any sales questions regarding the ADM-XRC-5T2, please e-mail us at:
Technical Support
For any technical questions regarding Alpha-Data products please e-mail us at:
