Products by Features
 | Product Features
Applications
|
Product Summary The ADM-XRC-5T2-ADV is a high performance reconfigurable PMC/XMC (PCI Mezzanine Card) based on the Xilinx® Virtex-5 range of Platform FPGAs. Features include high speed PCI-X® interface, external memory, JPEG2000 codecs, Gigabit serial I/O, programmable clocks, temperature monitoring and flash boot facilities. A comprehensive cross platform API with support for Microsoft Windows™, Linux and VxWorks™ provides access to the full functionality of these hardware features. The optional fitting of the XMC connector provides 8 High-Speed Serial Links out to the carrier card. | |
Front Panel I/O
There are two FCN connectors providing High Speed serial communication to/from the board.
JPEG2000 Devices
The ADM-XRC-5T2-ADV provides 4 ADV212 JPEG200 compression devices.
JTAG I/F
Provides the user access to configure the Target FPGA and to run Chipscope on the active design
Board Config
Allows host to configure system clocks, reload the target flash and directly program the target FPGA.
FLASH
Configuration Flash providing an initialisation design for automatic loading into the target FPGA.
Config Switches
Allows host to configure I/O voltage levels.
Local Bus
Links bridge and target FPGAs. 32/64bit wide data transfers, programmable clock rate 10MHz-80MHz, includes Demand mode DMA handshaking.
PCI Bridge
Alpha Data proprietary firmware is provided for the bridge. It is automatically loaded into the bridge FPGA at power-up.
Provides PCI bus access to/from the host system. Includes multiple DMA engines for fast data transfer.
DMA Engines
Multiple DMA engines allowing fast data transfers to/from the FPGA. Can perform Demand Mode DMA allowing the target to control data transfers.
Rear I/O
Provides 64 discrete digital I/O and if High Speed serial connector fitted, 8 High Speed Serial Links.
Target FPGA
Application/Target FPGA.
Target Device(s)
family : Virtex-5
footprint : FFG1738
devices : LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T
DDR-II SDRAM
512MByte in 2 independent banks (1G in 4 banks for LX330T, SX240T and FX200T) of DDR-II SDRAM 2 x 64M x 32-bits @ 333MHz
DDR-II SSRAM
8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz
| Product | ADM-XRC-5T2-ADV | ||
| Board Format | PMC/XMC | ||
| Type | FPGA Board | ||
| Host Interface | PCI/PCI-X® | ||
| Functional Summary | The ADM-XRC-5T2-ADV is a high performance reconfigurable PMC/XMC (PCI Mezzanine Card) based on the Xilinx® Virtex-5 range of Platform FPGAs. | ||
| Functional Description | Features include high speed PCI-X® interface, external memory, JPEG2000 codecs, Gigabit serial I/O, programmable clocks, temperature monitoring and flash boot facilities. A comprehensive cross platform API with support for Microsoft Windows™, Linux and VxWorks™ provides access to the full functionality of these hardware features. The optional fitting of the XMC connector provides 8 High-Speed Serial Links out to the carrier card. | ||
| Target Device(s) | family : Virtex-5 footprint : FFG1738 devices : LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T | ||
| Host Interface | 64-bit 66MHz PCI or 64-bit 133MHz PCI-X® interface in separate bridge device with 64-bit 80MHz local bus 4 DMA controllers FIFO and interrupt controller. | ||
| Carriers Compatible with ADM-XRC-5T2-ADV | |||
| On board memory | SDRAM : 512MByte in 2 independent banks (1G in 4 banks for LX330T, SX240T and FX200T) of DDR-II SDRAM 2 x 64M x 32-bits @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | ||
| Software | Drivers for Microsoft Windows™, Linux and VxWorks™ API with template designs in VHDL and Verilog | ||
| Specific Functions | JPEG2000 Codecs - 4 ADV212 devices Dual FCN Connections | ||
| Applications | Military, Aerospace, High Performance Computing, Broadcast, Medical/Bioinformatics, Security | ||
| Front Connector I/O |
| ||
| Rear Connector IO |
| ||
| Board Configuration | Clocks : Local bus clock programmable up to 80MHz Low-jitter user clock, programmable up to 637.5MHz Additional 200MHz reference clock for IOB delay circuits. FPGA : PCI Bus direct to SelectMAP port From Flash direct on power up External JTAG connector | ||
| Cooling Options | Air Cooled Commercial (standard) AC1 - air cooled industrial CC1 - conduction cooled industrial | ||
| Environmental Specification | Temperature : Air cooled option (AC0) Operating Temperature 0° to +55°C Non-Operating(Storage) Temperature -40° to +85°C Operating Humidity 5% to 95% at 40°C non-condensing Non-Operating(Storage) Humidity 5% to 95% at 40°C non-condensing EMC : FCC 47CFR Part 2 EN55022 Equipment Class B | ||
Further Environmental Information can be found by reading: |
| Product code |
ADM-XRC-5T2-ADV/z-y(m)(c)(x) | |
Virtex-5 device | z | LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T |
Virtex-5 Speed | y | 1, 2, 3 |
Cooling | c | blank = air cooled commercial, /AC1 = air cooled industrial, /CC1 = conduction cooled industrial |
Memory Upgrade | m | blank=1GByte (standard build), /2=2GByte |
XMC Fitted | x | blank = not fitted, /X = XMC Connector fitted |
Order Code Rules: When Conduction Cooled selected -3 devices are not available | ||
Sample Code :
ADM-XRC-5T2-ADV/LX110T-1
Order Code generation
Go to Order Code Generation Page which allows the generation of specific order codes. The numbers created on this page are for illustration purposes, please contact Alpha Data for more information.
Sales Questions
For any sales questions regarding the ADM-XRC-5T2-ADV, please e-mail us at:
Technical Support
For any technical questions regarding Alpha-Data products please e-mail us at:
