The XRM-FCN is an I/O Module which provides eight full-duplex high-speed serial communication channels.
The XRM provides the cost-effective solution to applications requiring high-speed data communications such as Infiniband TA, 10G Ethernet, 4x Fibre Channel. It allows easy connection of these cards to devices with compatible connectors and signaling standards by means of a simple, point-to-point connection schemes implemented using off-the-shelf cable assemblies. Both copper and optical('CX4') versions of the FCN connector are supported, with full control and fault signaling for each of the optical power connections.
A separate low-jitter oscillator is provided to support high-bit rate applications where the internal clock is unsuitable.
|FPGA Boards Compatible with XRM-FCN|
ADA-VPX3-7V1, ADA-VPX3-7K1, ADA-VPX3-6T1, ADM-XRC-7V1, ADM-XRC-7K1, ADM-XRC-7V1, ADM-XRC-6T1, ADM-XRC-6TGE, ADM-XRC-5T2, ADM-XRC-5T1, ADM-XRC-4FX, ADM-XRC-5TZ
Example UCF, HDL files and Application software are provided with the board.
Dual Infiniband 4x (4 lanes at 2.5Gb/s over copper or optical fibre)
Dual 10Gb/s Ethernet CX4 (4 lanes at 3.125Gb/s over copper or optical fibre)
Dual 10Gb/s Fibre Channel (4 lanes at 3.1875Gb/s over copper or optical fibre)
Dual 4x OC-48 SONET
The XRM-FCN is available for XRM and XRM2 based FPGA products.
|High Speed Serial Link|
Dual FCN connectors
Using a variety of plug in connectors allow for different copper/optical standards to be implemented.
Operating Temperature 0° to +55°C
Non-Operating(Storage) Temperature -40° to +85°C
Operating Humidity 5% to 95% at 40°C non-condensing
Non-Operating(Storage) Humidity 5% to 95% at 40°C non-condensing
FCC 47CFR Part 2
EN55022 Equipment Class B
Further Environmental Information can be found by reading:
The Alpha Data Environmental Specification