Reference Designs for each board are available separately. These demonstrate the capabilities of the board and enable customers to rapidly integrate their own design.
Configuring the PCI Express Bridge in Vivado
The IP configuration provides:
The reference designs include a getting started guide with two basic designs which are provided as packed Vivado GUI projects. Other included examples listed below:
Standalone SODIMM Test FPGA Design
Register Access FPGA Design
DMA Demonstration FPGA Design
IBERT FPGA Design
Host Interface to SODIMMs Example FPGA Design
USB Utilities for Power and Status Monitoring
SFP+/QSFP+ IBERT Loopback Demo
Basic 10G/25G loopback test for SFP+/QSFP using pseudo random tester
SFP+/QSFP 10GE XGMII Loopback Demo
10G XGMII to SFP+/QSFP tester
QSFP+ 40GE XGMII Loopback Demo
40G XGMII to QSFP tester
QSFP+ 10GE Ethernet Loopback Demo
Chevin Tech. 10G MAC/PHY Demo
QSFP28 25GE Ethernet Loopback Demo
Chevin Tech. 25G MAC/PHY Demo
SATA MAC IP and example PHY
Low Level SATA controller design
Dual-PCIE core Demo
Dual PCI Express End Point system
|Getting Started Block Diagrams|
Basic PCIe Block Diagram Demo
Simple PCI Express End Point with memory mapped interface
SDRAM PCIe Block Diagram Demo
Simple PCI Express End Point attached to onboard memory
✔ - Available
N/A - Not Applicable for this product
↺ - In Development
- Provided by Chevin Tehcnology
- Provided by Chevin Tehcnology (in development)
The reference designs are provided with a site licence and 12 months technical support. Contact Alpha-Data for further information.
The bridge uses standard AXI4 interfaces, making connecting it up to other modules is straightforward.
The PCI Express Bridge overview provides full details on the configuration of the IP.
Alpha Data also provide initial email and telephone support for these products. Long term support can also be purchased as well as design services.