Click image for larger view
Xilinx SDAccel DSA support
DSA implemented for Vivado 2017.4
The ADM-PCIE-7V3 board information is already available in Vivado. When creating a new project select the appropriate Alpha Data board from the list.
Xilinx Vivado Board Files
The ADM-PCIE-7V3 Board files are already available in Vivado. When creating a new project select the appropriate Alpha Data board from the list.
The ADM-PCIE-7V3 has been certified as OpenPOWER Ready.
The ADM-PCIE-7V3 is CAPI 1.0 compliant and compatible with Power8 systems.
The CAPI suport files can be downloded from the CAPI Support Website.
The ADM-PCIE-7V3 is compatible with CAPI SNAP Framework.
Further details of the Framework can be found on the CAPI SNAP web pages.
Support and Development Kit
The contents of the SDK can be viewed in
Purchase of RD-7V3 shown here is required to download the SDK and drivers.
The ADM-PCIE-7V3 SDK can be downloaded from here:
The ADM-PCIE-7V3 uses the ADB3 Driver which can be downloaded from here:
FPGA Features (Hard IP)
The ADM-PCIE-7V3 is a high performance reconfigurable Half-Length, low profile x8 PCIe form factor board based on the Xilinx Virtex-7 range of Platform FPGAs.
The ADM-PCIE-7V3 features two independent channels of DDR3 memory capable of 1333MT/s (fitted with two 8GB SODIMMs), high speed I/O, SATA connections, dual SFP+ ports supporting 10G Ethernet, voltage/temperature/current control and monitoring, air-cooled heat sink with removable fan. Please contact Alpha Data Sales for no-fan ordering option.
1/2 Length, Low profile, x8 PCIe form factor
Width: 174.5mm Height: 68.9mm Depth: 32.5mm Weight: 120g
Operating Temperature range: Operating Temperature 0°C to +55°C
Storage Temperature range: -40°C to +85°C
Operating Humidity range: Up to 95% (non-condensing)
PCI Express® Gen3 x8
Xilinx Virtex® -7
XC7VX690T-2 - FFG1157C
FPGA Hard IP Cores
On Board Memory
|Memory Type||No. Banks||Memory Size|
|ECC-SODIMMs||2||1G x 72 (8GiB)|
All power rails are sequenced and monitored by a TI Fusion IC. The TI Fusion controller monitors certain voltage readings, current readings, and Power OK signals to determine the state of the system. A PC can directly interact with the TI Fusion IC via the onboard PMBUS interface.
FPGA Configuration Flash
|Flash Type||Flash Size||No. config regions|
|BPI||1GBit||4 each of 256MBit|
High-Speed Network Interfaces
|Interface Type||Qty||Lanes per Interface||Data Rate per Lane||Protocol Capability|
|SFP+||2||1||14Gbps||User Configurable, includes 10G Ethernet|
Other I/O Interfaces
Dual Sata Interfaces (6Gbps)
Reference Design Package available separately
blank = Fan Fitted,
For any sales questions regarding the ADM-PCIE-7V3, please e-mail us at:
For any technical questions regarding Alpha-Data products please e-mail us at:
Click to close