System Order Code Generation

This page enables the generation of order codes for individual products or for a complete system. You choose the FPGA board, the required I/O Module and the carrier you wish to use.

If the I/O Module or carrier you would like to use is not available this means that they are not compatible with the FPGA board selected.

When ordering an XRM IO Module for a preowned FPGA card select the FPGA board you are going to attach the XRM Module to to ensure only compatible XRMs can be selected.

Note: there may be combinations which are still not valid despite being passed here. Check with Alpha Data for confirmation of codes. Copy the entire box at the bottom of the page to ensure all configuration information is available.




FPGA Board Selection

Select FPGA Board :

FPGA BOARD Options

Virtex-6 device :

Virtex-6 speed :

Memory Size Fitted :

Cooling :

Conformal Coating :

Pn4 Fitted :

Replace Ethernet link on Pn6 with x4 MGT link :

Replace Ref Clk 1 on Pn6 with 2 GPIO :

XMC Connector Type :

Note:

not all FPGA speed grades available in all configurations. Contact Alpha Data for full details.

Configuration rules of the ADM-XRC-6TGE

1) Pass: -3 FPGA Speed option not available in Industrial parts for AC1 or CC1

2) Pass: When LX550T selected, -3 devices are not available

3) Pass: When SX475T selected, -3 devices are not available

4) Pass: When Air Cooled commercial option chosen No conformal coating available

5) Pass: When Conduction Cooled commercial option chosen No conformal coating available


I/O Module Selection

The ADM-XRC-6TGE interfaces to Revision 2 XRM Modules. Please check with Alpha Data for the availablility of this version of the XRM Module.

Select I/O Module :

No I/O Module Selected for this product.


Carrier Board Selection

Select Carrier Board :

No carriers Selected for this product.


Order Codes for selected products

FPGA Board Order code : ADM-XRC-6TGE/LX240T-1

Virtex-6 device:

LX240T

Virtex-6 speed:

1

Memory Size Fitted:

256MBytes per bank - 1GBytes for the board

Cooling:

air cooled commercial

Conformal Coating:

No coating

Pn4 Fitted:

not fitted

Replace Ethernet link on Pn6 with x4 MGT link:

10/100/1000Base-T Ethernet link - x4 MGT on Pn6

Replace Ref Clk 1 on Pn6 with 2 GPIO:

MGT clock input on Pn6 - 44 GPIO on Pn6

XMC Connector Type:

XMC (VITA 42) Connectors


When ordering products copy all configuration information above to ensure correct choices are used.


Assembly Order Code : ADM-XRC-6TGE/LX240T-1




Please check with Alpha Data to confirm latest compatibility status between FPGA boards and XRM Modules.






©2019 Alpha Data Parallel Systems - All rights reserved