Alpha Data Products Comparison by group : Carrier Boards

ADC-PCIE-XMC3
Photo of the carrier Board: XMC three quarter-length PCIe carrier one XMC Card

Front IO

Excellent fan out of XMC PN4 and PN6 I/O signals to commercially available cable receptacles (SATA, Samtec TMFL, Samtec Firefly, VHDCI 68 Pin SCSI)

Separate PCIe Power connector


XMC Carrier card for PCI Express® based systems

Two 30mm fans provide cooling of XMC site.



ADC-XMC-BREAKOUT
Photo of the carrier Board: XMC Carrier/development board: Ethernet/SATA/USB/PCIE commercial

Front IO

2x 1000BASE-T Ethernet

2x Serial COM (using RJ-45)

2x USB

2x SATA

14x GPIO

8x PCIE/HSSIO (using XMC connector)

Separate PCIe Power connector


Provides simple fan cooling for the XMC

Onboard Current Sense Resistors allow power consumption analysis



ADC-PCIE-XMC
Photo of the carrier Board: XMC half-length PCIe Gen2 carrier one XMC Card

Front IO

Excellent fan out of XMC PN4 and PN6 I/O signals to commercially available cable receptacles (SATA, Samtec QSE, Samtec FFMD, VHDCI 68 Pin SCSI)

Rear IO

Separate PCIe Power connector


XMC Carrier card for PCI Express® based systems

Breakout of mezzanine board I/O



ADC-VPX3-7Z1
Photo of the carrier Board: XMC Carrier OpenVPX 3U  Single XMC ruggedized Dual mSATA

MSATA : Two full size mSATA sites, with direct connection to XMC site


Front IO

Optional, using XRM module fitted to ADM-XRC-7Z1.

Rear IO

x2 1000Base-T Ethernet

x2 USB

x1 RS-232 port

x1 RS-232/485 port

X8 HSSIO lanes to J5 (for PCIE)

X6 HSSIO lanes to J6

38 GPIO to J6



ADC-VPX3-XMC
Photo of the carrier Board: XMC Carrier OpenVPX 3U ruggedized Dual mSATA

MSATA : There are 2 full size mSATA sites allowing the addition of mSATA Flash drives providing very large storage capability.


Front IO

Depends on the attached XMC module

Rear IO

Dual 1000Base-X Ethernet Interfaces

Dual mSATA Interfaces

X single and Y pairs of discrete IO


Open VPX Compliance List

SLT3-PAY-2F2U-14.2.3

SLT3-PAY-1F1F2U-14.2.4

SLT3-PAY-1D-14.2.6

SLT3-PAY-2F-14.2.7

SLT3-PAY-1F4U-14.2.8

SLT3-PAY-8U-14.2.9

SLT3-PER-2F-14.3.1

SLT3-PER-1F-14.3.2

SLT3-PER-1U-14.3.3



ADC-XMC-II
Photo of the carrier Board: Dual XMC carrier Board PCI Express XMC cooling fans

Front IO

Allows direct (single ended/differential/high speed serial) communication between the XMC sites.

Allows direct (single ended/differential/high speed serial) communication between the XMC sites on other nearby ADC-XMC-I/II carriers or other compatible devices

Separate PCIe Power connector


Carrier card for PCI Express® based systems.

Allows direct communication between the XMC sites.

Supplied with a debug/adaptor board (order code ADT-XMC) for connecting 19 single ended, and 16 differential pairs to external I/O.
XMC-II Adaptor Board

All external I/O (single ended, differential, and high speed serial IO (HSSIO)) can be chained to nearby ADC-XMC-I/IIs for inter XMC communication.



ADC-PMC2
Photo of the carrier Board: PMC Carrier PCI two PMC slots Full length PCI card

Front IO

Allows communication between front and rear PMC boards via intraboard connections


PMC/XMC Carrier card for PCI/PCI-X® based systems.

Provides simple fan cooling for each PMC location.



Not recomended for new designs.

ADC-VXS
Photo of the FPGA/Carrier Board: Virtex-5 PMC VXS Dual Virtex-5 two PMC slots

SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (64M x 32-bits each) @ 333MHz

FLASH : 2 x 4MByte serial Flash

FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA.


Front IO

4 - x4 SFP modules or x4 HSSDC2 connectors

Rear IO

110 I/O connections from Pn4 to VME P2 (VITA 35 compliant)

x8 Links to P0 connector. High speed switching to XMC sites or on board Virtex-5 devices.


Provides sites for 2 PMC boards as well as onboard FPGA sites.



ADC-CPCI-3U
Photo of the carrier Board: PMC Carrier for Compact PCI System Chassis: single PMC slot

Rear IO

Universal V(I/O) decided by backplane


PMC Carrier card for Compact PCI based systems.



ADC-CPCI
Photo of the carrier Board: PMC Carrier cPCI system dual PCM slots with PCI bridge

Front IO

Allows communication between front and rear PMC boards via intraboard connections


PMC Carrier card for Compact PCI based systems.






©2018 Alpha Data Parallel Systems - All rights reserved