Preliminary Product Information


ADM-XRC-9R1 - RF Signal Sampling/Generation

AD01353



Applications

  • RF Signal Sampling/Generation
  • Radar
  • Beamforming
  • MIMO (5G) communications Tx and Rx
  • Signal Detection/Jamming

Board Features

  • Xilinx Zynq Ultrascale+ FPGA
  • XMC (Switched Mezzanine Card, VITA 42)
  • On-board microcontroller accessible via USB, provides
  • power rail monitoring
  • temperature Monitoring
  • clock programming
  • COTS Product

FPGA Features (Hard IP)

  • 4x ARM® Cortex™-A53 MPCore™ - 1.5GHz
  • 2x ARM® Cortex™-R5 MPCore™ - 533MHz
  • 8x 12 bit 4/5 GSPS RF-ADC
  • 8x 14 bit 6.5/10 GSPS RF_DAC
  • 8x SD-FEC cores (ZU28/ZU48 only)
  • 1x PCIe Gen3x8 in Fabric
  • 1x PCIe Gen2x4 to ARM PS


Summary

The ADM-XRC-9R1 is a high performance System On Module (SOM) based on the Xilinx Zynq Ultrascale+ RFSoC, which combines FPGA Fabric, ADC and DAC interfaces and ARM CPU cores in a single low-power device.

The module is provided in rugged XMC format and is available in Industrial temperature grades with Air- or Conduction Cooling.


Board Format

XMC (Switched Mezzanine Card, VITA 42)


Environmental Specifications

Temperature Limits:

CodeCooling OptionOperating Temp.Storage Temp.
MinMaxMinMax
AC1Air Cooled Industrial-40°C+70°C-55°C+100°C
CC1Conduction Cooled Industrial-40°C+70°C[1]-55°C+100°C
[1] - with high-efficiency system cooling this can be raised to 85°C - Contact Alpha Data for more details

Conformal Coating Options:

Acrylic or Polyurethane

Contact sales for specification of coatings.

Operating Humidity range:

Up to 95% (non-condensing)

EMC Conformity:

FCC 47CFR Part 2
EN55022:2010 Equipment ClassB

For more information on the operating conditions for the different cooling options go to: Alpha Data Environmental Specification Page.

Or read: Alpha Data Environment Specification (PDF).


Host I/F

PS - PCI Express® Gen2 x4 (P5). PL - PCI Express® Gen3 x8 or 10 Gigabit Ethernet (P6)


Target FPGA Device

Xilinx Zynq® Ultrascale+

XCZU27DR-2 XCZU28DR-2 XCZU47DR-2 XCZU48DR-2 - FFVE1156 or FSVE1156

FPGA Resources

Chosen DeviceLogic CellsDSPsBRAMURAM
XCZU27DR-2930k427238Mb22.5Mb
XCZU28DR-2930k427238Mb22.5Mb
XCZU47DR-2930k427238Mb22.5Mb
XCZU48DR-2930k427238Mb22.5Mb

FPGA Hard IP Cores

  • 4x ARM® Cortex™-A53 MPCore™ - 1.5GHz
  • 2x ARM® Cortex™-R5 MPCore™ - 533MHz
  • 8x 12 bit 4/5 GSPS RF-ADC
  • 8x 14 bit 6.5/10 GSPS RF_DAC
  • 8x SD-FEC cores (ZU28/ZU48 only)
  • 1x PCIe Gen3x8 in Fabric
  • 1x PCIe Gen2x4 to ARM PS

On Board Memory

Memory TypeNo. BanksMemory Size (per bank)
SDRAM116Gb DDR4 2GB @ 32bits wide (Connected to PS)
SDRAM28Gb DDR4 1GB @ 16bits wide (Connected to PL)
microSD1SD Card specific SDC (Connected to Ps)

Target FPGA Configuration

  • PS - Configured via QSPI or uSD

FPGA Configuration Flash

Flash TypeFlash SizeDescription
QSPI512MBit

On-board Clock Specifications

  • 250MHz Reference Clock- HSSIO MGTs
  • Programmable Clock (150MHz default)
  • 300MHz Reference Clock (DDR4)
  • 300MHz Fabric Clock
  • 25MHz Reference Clock (Ethernet)
  • 50MHz Reference Clock (PS Core)
  • External Analog Reference Clock (from XMM)

I/O Interfaces

Interface TypeQtyDescription
ANALOG I/O (Front I/O)
High-Frequency Analogue Inputs812-bit 4/5GSPS RF-ADC
Connector: CMM Micro connectors
High-Frequency Analogue Outputs814-bit 6.5/10GSPS RF-DAC
Connector: CMM Micro connectors
DISCRETE I/O (Front I/O)
High-Frequency Analogue Outputs8Reference Clocks
Connector: CMM Micro connectors
Low-Speed Digital IO32GPIO (32 single ended or 16 differential pairs)
REAR I/F FROM PS I/O (P4)
High-Speed Serial IO21 Gigabit Ethernet
Low-Speed Serial IO2USB Interfaces
Low-Speed Serial IO2Serial Comms Ports
REAR I/F FROM PL I/O (P6)
High-Speed Serial IO8HSSIO Links - 10G Ethernet or PCI Express Gen3 x8
ONBOARD COMMS I/O (Onboard)
Onboard USB Comms1USB Interface
Connector: USB connector

Software

ARM centric Targeted Reference Design and Board Support Package. Gen3x8 example PCIe reference design (via P6) compatible with the ADXDMA driver and API for Windows and Linux.


Ordering Code
ADM-XRC-9R1(d)(c)(a)
ParametercodeParameter Description
Deviced

/Z27 = XCZU27DR-2,
/Z28 = XCZU28DR-2,
/Z47 = XCZU47DR-2,
/Z48 = XCZU48DR-2

Coolingc

/AC1 = air cooled industrial,
/CC1 = conduction cooled industrial

Conformal Coatinga

blank = no conformal coating,
A = Acrylic,
P = Polyurethane

Contact sales for other ordering options

Sample Product Code:

ADM-XRC-9R1/Z27/CC1A


Deliverables

  • ADM-XRC-9R1 Board
  • One Year Warranty
  • One Year Technical Support


Sales Questions

For any sales questions regarding the ADM-XRC-9R1, please e-mail us at:

sales@alpha-data.com


Technical Support

For any technical questions regarding Alpha-Data products please e-mail us at:

support@alpha-data.com








©2019 Alpha Data Parallel Systems - All rights reserved