XRM2-RF-ATD - RF Signal Sampling/Generation



Applications

  • RF Signal Sampling/Generation

Board Features

  • Alpha Data XRM2 I/O Module
  • Dual 12-bit 6Gsps ADCs
  • Dual 12-bit 6Gsps DACs
  • External Clock Input


Summary

The XRM2-RF-ATD is an XRM2 I/O module, providing two full duplex RF channels at center frequencies between 70 MHz and 6 GHz. Intended for use in FPGA-based general-purpose radio systems.

This board provides Frac-N based synthesis of local oscillator signals for up/down conversion, digital filtering and 12-bit quantization of baseband data.

Channel bandwidths are software selectable from 200 kHz to 56 MHz. Real-time monitor signals, control signals for manual and automatic gain control and base-band synchronization of multiple devices are supported. The application can use either the internal clock or an externally provided clock source.


Board Format

Alpha Data XRM2 I/O Module


Environmental Specifications

Temperature Limits:

CodeCooling OptionOperating Temp.Storage Temp.
MinMaxMinMax
AC1Air Cooled Industrial-40°C+70°C-55°C+100°C
CC1Conduction Cooled Industrial-40°C+70°C[1]-55°C+100°C
[1] - with high-efficiency system cooling this can be raised to 85°C - Contact Alpha Data for more details

Conformal Coating Options:

Acrylic or Polyurethane

Contact sales for specification of coatings.

Operating Humidity range:

Up to 95% (non-condensing)

EMC Conformity:

FCC 47CFR Part 2
EN55022:2010 Equipment ClassB

For more information on the operating conditions for the different cooling options go to: Alpha Data Environmental Specification Page.

Or read: Alpha Data Environment Specification (PDF).


I/O Interfaces

Interface TypeQtyDescription
ANALOG I/O (Front Panel)
ADC2Dual Analog to Digital Converters
Resolution: 12-bit
Max Clock Rate: 6Gsps
Impedance: 50Ω
Levels: Power: +0dBm Typical,+2.5dBm Max
Connector: SSMC
DAC2Dual Digital to Analog Converters
Resolution: 12-bit
Max Clock Rate: 6Gsps
Impedance: 50Ω
Levels: Power: +7dBm Max
Connector: SSMC
DISCRETE I/O (Front Panel)
External clock input1External clock input
Max Clock Rate: 80MHz
Bandwidth: 10MHz to 80MHz
Impedance: 50Ω
Connector: SSMC

Software

Example UCF, HDL files and Application software are provided with the board.


Ordering Code
XRM2-RF-ATD(a)
ParametercodeParameter Description
Conformal Coatinga

blank = no conformal coating,
/A = Acrylic,
/P = Polyurethane

Note#

No build options for AC or CC. Mode of cooling is dependent on the board the XRM2 is attached to.

Contact sales for other ordering options

Deliverables

  • XRM2-RF-ATD Board
  • One Year Warranty
  • One Year Technical Support


Sales Questions

For any sales questions regarding the XRM2-RF-ATD, please e-mail us at:

sales@alpha-data.com


Technical Support

For any technical questions regarding Alpha-Data products please e-mail us at:

support@alpha-data.com








©2019 Alpha Data Parallel Systems - All rights reserved