Contact

Summary

The ADM-VPX3-9Z2 is a high performance reconfigurable 3U OpenVPX format board based on the Xilinx Zynq Ultrascale+ range of MPSoC FPGAs.

Features include PCI Express Gen2 interface (x4), external memory, high density I/O using a Vita 57.4 FMC+ interface, Dual Gigabit Ethernet Interface and 10G Ethernet V66.4 Optical Interface, system monitoring and flash boot facilities.

Applications

Embedded System Data Processor
Radar/Sonar Beamforming
ELINT/ISR
Image/Video Processing/Machine Vision
Digital Signal Processing
Data Encryption

Board Features

8GB DDR4-2400 SDRAM
FMC+ I/O Interface

FPGA Features (Hard IP)

4x ARM® Cortex™-A53 MPCore™ - 1.5GHz
2x ARM® Cortex™-R5 MPCore™ - 600MHz
1x Mali™-400 MP2 up to 667MHz GPU
1x PCIe® Gen2 x4
2x USB3.0
1x SATA 3.1
1x DisplayPort
4x Tri-mode Gigabit Ethernet

Specification

Board Format

3U VPX (OpenVPX Compliant)

Environmental Specifications

Temperature Limits
Operating Temperature RangeStorage Temperature Range
MinMaxMinMax
AC1Air Cooled Industrial-40°C+70°C-55°C+100°C
CC1Conduction Cooled Industrial-40°C+70°C-55°C+100°C

Operating Humidity Range:
Up to 95% (non-condensing)

EMC:
FCC 47CFR Part 2
EN55022:2010 Equipment ClassB


Host I/F

PCI Express Gen2 x4


Target Device

Xilinx Zynq® UltraScale Plus™
XCZU15EG (FFVB1156)

FPGA Resources

Chosen DeviceFFsLUTsDSPsBRAMURAM
XCZU15EG682k341k352826.2Mb31.5Mb

FPGA Hard IP Cores

4x ARM® Cortex™-A53 MPCore™ - 1.5GHz
2x ARM® Cortex™-R5 MPCore™ - 600MHz
1x Mali™-400 MP2 up to 667MHz GPU
1x PCIe® Gen2 x4
2x USB3.0
1x SATA 3.1
1x DisplayPort
4x Tri-mode Gigabit Ethernet

On Board Memory

Memory TypeNo. BanksMemory Size (per bank)
SDRAM18GB (+ECC) DDR4-2400

Other on-board memory

32GBytes of Flash Memory on an embedded Multi Media Card (eMMC v4.5 @1.8V)


Target FPGA Configuration

Flexible boot options from on-board SPI Flash or uSD Flash


FPGA Configuration Flash

Flash TypeFlash Size
QSPI2GBit

On-board Clock Specifications

REFCLK100M (to fanout buffer - PCIe)
PROGCLK (programmable clock to fanout buffer - 150MHz default)
REFCLK300M (to fanout buffer - DDR4)
FABRIC_CLK (to PL side - IDELAY)
2 Bidirectional FMC Clocks


I/O Interfaces

Interface TypeQtyDescription
FRONT I/O (FMC+)
High-Speed Serial Comms2424 High-Speed differential Serial Links (up to 16.3Gbps)
Discrete Digital80/16080 diff pairs (or 160 single ended) GPIO
FRONT I/O (Front Panel)
Low-Speed Comms1microUSB Interface
REAR I/O (VPX connector)
High-Speed Comms110G Ethernet V66.4 Optical Interface
High-Speed Comms2Gigabit Ethernet Interface
High-Speed Comms2USB Interface
Low-Speed Comms2RS-232 and RS-232/485 comms ports
Discrete Digital24LVCMOS 3.3V GPIO connections via P2
ON-BOARD I/O (Storage)
On-board Storage1Integrated SATA Storage Device - 32GBytes

Ordering Information

Ordering Code

ADM-VPX3-9Z2/z-2(c)(o)

ParameterCodeParameter Description
Zynq Ultrascale+ devicez15EG = ZU15EG,
9EG = ZU9EG (Contact Sales for availability)
Coolingc/AC1 = air cooled industrial,
/CC1 = conduction cooled industrial
Opticsoblank = No Optics fitted,
/O = V66.4 Optical Interface fitted

Related Products

FMC-PLUS-QSFP-DD

FMC-PLUS-QSFP-DD

High-speed Communications

The FMC-PLUS-QSFP-DD is an FMC+ I/O module, providing three QSFP-DD cages. Each cage supports eight bi-directional high speed serial channels up to 28Gbps, allowing support for standard protocols such as 2x100GE, or 8x10GE with appropriate breakout electrical cabling or optical modules. Total maximum bandwidth through the card supports 6x100GE connections, although this is dependent on the capabilities of the connected host board FPGA and the customer's communication protocol IP.

View Product

FMC-DA4

FMC-DA4

RF/IF Signal Sampling/Generation

The FMC-DA4 is an FMC I/O Module, providing two Analog to Digital converters with 14-bit resolution and sampling rates up to 3Gsps, and two Digital to Analog converters with 16-bit resolution and sampling rates up to 2.5Gsps.

View Product

FMC-RCP-10G

FMC-RCP-10G

40G Ethernet

The FMC-RCP-10G is an FMC I/O Module with up to four 10Gb/s Optical transceiver channels.

View Product

FMC-RCP-4G

FMC-RCP-4G

High-Speed Communications

The FMC-RCP-4G is an FMC I/O module with up to four 4Gb/s Optical transceiver channels.

View Product

FMC-IO68

FMC-IO68

Discrete I/O

The FMC-IO68 is an FMC I/O Module which provides a discrete I/O Interface.

View Product

FMC-CAMERALINK

FMC-CAMERALINK

Camera Link I/O Interface

The FMC-CAMERALINK is an FMC I/O Module which provides an industry standard CameraLink interface.

View Product

FMC-IPASS

FMC-IPASS

PCI Express Gen 3 Interface

The FMC-IPASS is an FMC I/O Module which provides an industry standard High-Speed Serial interface.

View Product

ADM-VPX3-9Z2-RTM

ADM-VPX3-9Z2-RTM

ADM-VPX3-9Z2 Testing/Debug

The ADM-VPX3-9Z2-RTM is a 3U, VPX, Rear Transition Module (RTM) designed to interface with Alpha Data ADM-VPX3-9Z2 Zynq Ultrascale+ FPGA board.

View Product

Resources

Reference Designs: (RD-9Z2)

Download Reference Designs [Login Required]


Deliverables

ADM-VPX3-9Z2 Board
One Year Warranty
One Year Technical Support

Support

Please contact Alpha Data for full details on the available support packages for the ADM-VPX3-9Z2.

Sales Questions

Sales Questions

For any sales questions please e-mail us at sales@alpha-data.com

Sales Questions

Technical Support

For any technical questions please e-mail us at support@alpha-data.com

Get in touch and request a quote


Contact Us