AD01152
The XRM2-DAC-D4/1G is an XRM2 I/O Module, providing two Digital to Analog converters with 16-bit resolution and sampling rates up to 1GHz.
Aimed at IF/Baseband signal generation, provision is made for use of either an external or internally generated clock source. External trigger and auxiliary I/O ports are also provided.
IF/Baseband data signal generation
| Operating Temperature Range | Storage Temperature Range | ||||
|---|---|---|---|---|---|
| Min | Max | Min | Max | ||
| AC0 | Air Cooled Commercial | 0°C | +55°C | -40°C | +85°C |
Operating Humidity Range:
Up to 95% (non-condensing)
EMC:
FCC 47CFR Part 2
EN55022:2010 Equipment ClassB
| Interface Type | Qty | Description |
|---|---|---|
| ANALOG I/O (Front Panel) | ||
| DAC | 2 | Dual 16-bit DACs up to 1GHz Resolution: 16-bit Max Clock Rate: 1000MHz Bandwidth: 1MHz to 350MHz Impedance: 50Ω (AC coupled) Levels: 2Vppk (open circuit)| 1Vppk (50Ω load) Connector: SMA |
| DISCRETE I/O (Front Panel) | ||
| External clock input | 1 | External clock input Bandwidth: 5MHz to 1GHz Impedance: 50Ω (AC coupled) Levels: -6dBm to +12dBm (0dBm nominal) Connector: SMA |
| Trigger I/O | 1 | Trigger I/O Impedance: 4k7Ω (DC coupled) Levels: 3.3V LVTTL Connector: SMA |
| Auxiliary I/O | 1 | Auxiliary I/O Impedance: 4k7Ω (DC coupled) Levels: 3.3V LVTTL Connector: SMA |
| DISCRETE I/O (PCB Connector) | ||
| Synchronisation I/O | 2 | Synchronisation I/O Levels: 1V8 Logic (DC coupled) Connector: U.FL - Limited Access in assembled system User configurable as inputs or outputs, signals direct to FPGA pins (Vccfpio). Note: signals on these connectors must be restricted to 1V8 logic otherwise damage may result. |
| Ordering Code | ||
|---|---|---|
| XRM2-DAC-D4/1G(u) | ||
| Parameter | Code | Parameter Description |
| XRM2 Keying | u | blank = keyed connector, /U = unkeyed connector |
The ADM-XRC-KU1 is a high performance reconfigurable XMC (compliant to VITA Standard 42.0 and 42.3) based on the Xilinx Kintex Ultrascale range of Platform FPGAs.
The ADA-VPX3-KU1 assembly is based on the Xilinx Kintex UltraScale range of Platform FPGAs, bringing together the power and configurability of the ADM-XRC-KU1 FPGA module in a 3U VPX format.
The ADM-XRC-7Z1 is a high performance reconfigurable XMC (compliant to VITA 42.0) based on the Xilinx Zynq range of Programmable System-on-Chips.
The ADM-XRC-7V1 is a high performance reconfigurable XMC (compliant to VITA Standard 42.0 and 42.3) based on the Xilinx Virtex-7 range of Platform FPGAs.
The ADM-XRC-7K1 is a high performance reconfigurable XMC (VITA 42.3 Mezzanine Card) based on the Xilinx Kintex-7 range of Platform FPGAs.
XRM2-DAC-D4/1G Board
One Year Warranty
One Year Technical Support
Please contact Alpha Data for full details on the available support packages for the XRM2-DAC-D4/1G.
For any sales questions please e-mail us at sales@alpha-data.com
For any technical questions please e-mail us at support@alpha-data.com
© 2023 Alpha Data Parallel Systems - All rights reserved
Terms and Condition of Sale (Worldwide, excl. USA)
Terms and Condition of Sale (USA only)
